Fluke Ti10 Ti 10 FLIR Thermal Imager W/ IR-Fusion and SmartView For complete Fluke Ti10 infrared thermal imaging resources visit our dedicated Ti 10 Site

The ultimate tool for troubleshooting and maintenance          This thermal imager is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others. Thermal imaging is a non contact technology that measures infrared wavelengths to determine temperatures at a safe distance.  A thermal imager displays an image that uses many different colors to represent different temperatures. This image makes it quick and easy to visually check surface temperatures and pinpoint hot spots. Hot spots or a rise in temperature often indicate that a problem exists or a failure could become a reality.   Until recently, thermal imaging was complicated and expensive, keeping it in the domain of thermography specialists. Fortunately, recent advances in technology and Fluke engineering have not only lowered the costs but also made imagers easier to use and practical as an everyday troubleshooting tool in harsh work environments.   Diagnostic power reveals the data behind the picture All Fluke thermal imagers are fully radiometric. These units not only graphically display temperature differences, they also measure and store temperatures at every point in the image. All these data points can be recalled and used for detailed analysis of a potential problem or just monitoring trends over time of the same location. Whether you work in an industrial, electrical or commercial facility you can discover if and where a problem exists quickly and easily before contact measurements even need to be made.   Applications Temperature changes can indicate problems in many areas which include:  Inside electrical distribution and service such as switch gears, panels, controls, fuses, transformers, receptacles, lighting, conductors, overhead buses, motor control centers Motors, pumps and mechanical such as electric motors and generators, pumps, compressors, evaporators, bearings, couplings, gearboxes, gaskets and seals, belts, rollers, disconnects Process tanks and vessels, pipes, valves and traps, reactors, process insulation HVAC/R air conditioning, heating, air handlers, refrigeration Outside electrical distribution for utilities transformers, bushings, insulators, transmission lines, other exterior conductors, service connections, disconnects, capacitor banks  IR-Fusion Technology:  See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on Ti10 models.   Enhanced problem detection and analysis capabilities with IR-Fusion Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images. Optimized for field use in harsh work environments. Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool? Withstands dust and water—tested to an IP54 rating. Delivers the clear, crisp images needed to find problems fast. Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD). Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb. Everything needed to get started is included. Adjustable hand strap for left-or right-handed use. Manufactured in the U.S.A.

Detailed specifications Temperature Temperature measurement range (not calibrated below -10 °C) -20 °C to +250 °C (-4 °F to + 482 °F) Accuracy ± 5 °C or 5 % (whichever is greater) Imaging performance Field of view 23° x 17° Spatial resolution (IFOV) 2.5 mRad Minimum focus distance Thermal lens: 15 cm (6 in) Visible (visual) light lens: 46 cm (18 in) Focus Manual Image frequency 9 Hz refresh rate Detector type 160 X 120 focal plane array, uncooled microbolometer Infrared lens type 20 mm F = 0.8 lens Thermal sensitivity (NETD) ≤ 0.2 °C at 30 °C (200 mK) Infrared spectral band 7.5 μm to 14 μm Visual camera 640 x 480 resolution Image presentation Palettes Ironbow, blue-red, high contrast, grey Level and span Smooth auto-scaling and manual scaling of level and span Minimum span (in manual mode) 5 °C (9 °F) Minimum span (in auto mode) 10 °C (18 °F) IR-Fusion information Full infrared or picture-in-picture Picture-In-Picture (PIP) 100 % IR displayed in center 320 x 240 pixels Full screen (PIP off) 100 % IR displayed in center 640 x 480 LCD Image and data storage Storage medium SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each or 3000 basic (.bmp) IR images) File formats Non-radiometric (.bmp) or fully-radiometric (.is2) No analysis software required for non-radiometric (.bmp) files Export file formats w/SmartView software JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF

General specifications Temperature Operating: -10 °C to 50 °C (14 °F to 122 °F) Storage: -20 °C to +50 °C (-4 °F to 122 °F) without batteries Relative humidity   10 % to 90 % non-condensing Display   9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto) Controls and adjustments   User selectable temperature scale (°C/°F)   Language selection   Time/Date set Software   SmartView full analysis and reporting software included Power Battery: Internal rechargeable battery pack (included) Battery life: Three to four hours continuous use (assumes 50 % brightness of LCD) Battery charge time using ac adapter/charger and dc car charger: Two hours for full charge AC operation & charging   AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included. Power saving   Sleep mode activated after 5 minutes of inactivity, automatic power off after 20 minutes of inactivity Safety standards CE Directive: IEC/EN 61010-1 2nd Edition Pollution Degree 2 Electromagnetic compatibility EMC directive: EN61326-1 C-Tick: IEC/EN 61326 US FCC: CFR 47, Part 15 Class A Vibration   2 G, IEC 68-2-29 Shock   25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides} Dimensions (HxWxL)   0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in) Weight   1.2 kg (2.65 lb) IP rating   IP54 Warranty   Two-years Calibration cycle   Two-years (assumes normal operation and normal aging) Supported languages   English, Italian, German, Spanish, French, Russian, Portuguese, Swedish, Turkish, Czech, Polish, Finnish, Simplified Chinese, Traditional Chinese, Korean, and Japanese